[Print]

Software for Orienteering

This software list is published by the IOF IT Commission. If you want your software to be listed here, please send a text in the format below to webmaster@orienteering.org.

Animator
Current version: 1.03
Author: Zbynek Cernin
Address: Lamacova 911, CZ-152 00 Praha 5, Czech Republic
Tel: +420 251 681 228
fax: +420 251 814 584
e-mail: zbynek.cernin@volny.cz
Web Page: orienteering.wz.cz
It allows to publish map, courses, routes and split-times on the web as interactive internet application which allows to animate run of competitors on the map (play, stop, pause, speed, runners selection functions). Internet user can study routes together with split-times. He can draw own route otherwise animation run on connection between controls. Import from different software and files available. Publishing of flags and runner's photos available. Used during WOC 2003. Event data proceeding by author available.
Language: English, German, Spanish, Portuguese, Czech, Polish, Hungarian
Hardware requirements: IBM PC 486 (Pentium recommended)
Software requirements: Windows 95/98/NT/2000/XP
Price: Demo download possible, club licence 49,-US$

Distribution: Author

BaLiZaS NeT
Current version 1.6 10/10/2000
Author: Julio Briso-Montiano
Email: bosquing@pagina.de
Web: http://bosquing.pagina.de
Description: Easy program to share your partial times of your runs, by internet, along the users you define. You can compare split times with other runners, and also,you can draw your trace in a map and send it to your friends. In Spanish, but very easy to use. Full demo available at web.
Language: Spanish
Hardware requirements. IBM Compatibles, Any age.
Software requirements: Windows.
Price: US$10

B.I.O.S. (Bill Irvine's Orienteering Software)
Current version 0996
Author: Bill Irvine
Address: 8 Menzies Street, Hamilton, New Zealand. Phone/Fax 64 7 8496444
Email: billirvi@midland.co.nz
Description: Event software. Comprehensive event organiser. Is a database for entries. Allocates start times. Prints address labels, clip card labels, competitor lists, starter's schedules, program, results, certificates etc. At the event results are typed in by number and finish time. Result labels are printed for immediate display on results board (target, five minutes from competitor finishing) or results can be printed on pages. Handles Multi-days, chasing starts and relays. I advise on stationery, power supplies and general event organisation.
Language: English
Hardware requirements. IBM Compatibles, Any age.
Software requirements: DOS. Any version.
Price: US$50 per event

BOF Results System
Author: Joe Lee
Address: 18 Darfield, Upholland, Skelmersdale, Lancs, WN 8 0 AT, UK
Tel: +44 1695 - 623109
Mobile: 0973 360673
email: JoeLeeCom@aol.com
Description: A complete timekeeping, commentating, and results system for any event from 1 to 6 day, individual or relay. Provides for multi-lane finishes, multi-screen commentator info from up to 2 radio points per class, plus run-in info, predicted arrival times for leading competitors, and full results printing either full page or by labels. Written to BOF specifications and used for BOF National Championships and JK events. A relay pre-processing package to run on PCs is available to interface to this system.
Hardware: runs under OS/9 on VME bus systems (current system with 18 users - expandable as required). Written in C.
Availability: Due to its complexity, it is not for sale, Joe Lee provides full service for events including hardware, generators, backup equipment and staff if needed - Joe has been supplying computer services to sports meetings since 1980, including National Cross Country Championships, ESAA Nationals, the KIMM, and Mountain Biking events.

BOSQUING
Current Version 1.4
Author : Julio Briso-Montiano Morales
Address : C/Hernando de Acuña 59, 1º A 47014-Valladolid, Spain.
Phone: +34 983 343376
Email : varese@arrakis.es
Description: Multi-days event Software. Organiser for entries, clubs, runners, relays, exportable data, start times, results, printouts, working in net. Free demo version full working for twenty applicants. Easy to work.
Language : English and Spanish.
Hardware requirements: PC Compatibles with 32MB RAM
Software requirements: W95
Price: US$66
http://www.arrakis.es/~varese/bosenglish.html

CLUE
Current version: 1.2
Author: Fred Kruesi
Address: 703 Brooke Road, Exton PA 19341, USA Tel: +1 610 363 7459
Description: Clue creates control description sheets for orienteering events
Language: English
Hardware requirements: Windows 3.1 compatible computer
Software requirements: Windows 3.1 or later
Price: US$ 10
Distributor: Author

Clue Sheet
Current version:2.0
Author: David Dana Address: 1616 156th Ave NE #111,Bellevue WA 98007, USA
e-mail: SanadSoft@aol.com
add-on's: Ueli Hebeisen
Address: Turmhaldenstrasse 9, Winterthur CH8400, Switzerland
tel: +41 52 213-2507
e-mail: uh@dataway.ch WWW: http://www.dataway.ch/~uh/o -software.html
Clue Sheet is a shareware Macintosh program for preparing orienteering course description sheets. Previous versions have been used around the world since 1989. Version 2.0 keeps the direct, graphical interface of the earlier versions, but is almost completely rewritten to improve its flexibility and to ease handling of large meets.
language: English
add-on text translations: French, German, Italien
hardware requirements: any Macintosh or compatible
software requirements: Mac OS System >6.0.4
price: single user licence US $20, club licence US $40
distribution: Internet (see WWW-pages of author). A demo version of the software may be obtained via the web pages of Rick Slater (o-equipment) in USA or from Ueli Hebeisen in Europe.

Comp 'O' with SPORTident for Win95/NT/2000/XP/Macintosh
Current version: 2.0
Author: Andrew Stocks
Address: 29 Hymettus St, Howrah, Australia
Tel.: +61 3 62472124
Fax: +61 3 62472124
E-mail: andrew.stocks@education.tas.gov.au
Description: Comp 'O' is software for processing orienteering results with or without the use of SPORTident technology. Features include: - post-event data entry or pre-entry of information including fee collection and merchandise sales.
More info at: http://www.tased.edu.au/tasonline/otinc/new/compo.htm
Languages: English
Hardware requirements: min. 4 MB RAM, 10 MB recommended
Software requirements: Microsoft Windows (95 onwards) or Macintosh
Price: $120US
Distributor: Author

Condes
Current version: 8.0
Author: Finn Arildsen
Address: Stenrosevej 77, DK-8330 Beder, Denmark
Tel.: +45 8627 3658
e-mail: finn@arildsen.com
web: http://www.condes.net
Description: Course planner’s workbench: On-screen course planning (map import from OCAD -.ocd, .jpg, .bmp or .emf files) - Print maps and courses - Course overprints on existing maps - Pictorial and textual control descriptions - Export maps and courses as Bitmap files and, Encapsulated PostScript (EPS) - Export courses as OCAD files (.ocd) - Advanced Farsta relay variations - course lengths - control load calculation - punch patterns etc.etc.
Languages: English, Danish, Finnish, German. Textual control descriptions available in: English, Danish, German, Finnish, French, Italian, Norwegian, Swedish
Hardware requirements: PC
Software requirements: Windows 2000 or newer recommended
Price: DKK 1798. Upgrade from version 7: DKK 1275. (Prices are excl. VAT inside the EU)
A free demo version of the software can be downloaded from www.condes.net
Distributor: Author

ControlPOINT for OCAD
Current version: 5.0
Author: Usko Karvinen
Address: Enonkoskentie 2230, FIN 58175 Enonkoski, Finland
Tel: +358 49 653 957
Description: A tool for creating control descriptions and course printings. - Control descriptions Vector symbols, WYSIWYG, TrueType fonts. Floating palette for symbols - Course setting All control points, starts, marked routes etc. are placed in the OCAD map file using special symbols. Course setting is done in ControlPOINT by selecting control points with mouse. ControlPOINT creates connection lines, places control point numbers and calculates course lengths automatically. ControlPOINT exports course printing & control description in OCAD readable DXF-format. - Printing ControlPOINT prints control descriptions for courses, all starts and controls, punch patterns, control cards, control stress table etc. Course prints via OCAD.
Languages: Swedish and Finnish. English soon.
Hardware requirements: 2 MB of memory, VGA or better, mouse
Software requirements: Microsoft Windows 3.1 or later. OCAD 5 for course setting.
Price: FIM 395.-
Distributor: Bertel Pahlman, Sydmovägen 399, FIN 21600 Pargas, Finland Tel: +358 21 458 7108 (in the evenings)

CORPSE for Windows - Benchmark in Sports Software
Current version: 4.0 released December 2000
CORPSE is software for course planning and course setting. Plan courses directly onto map images, place and drag controls to new positions, automatic course length calculations, describe controls once only in IOF symbols or English, 10 level undo command, approach / departure arrows from controls, unlimited number of controls, break leg lines & control circles, add water drops, multi-loop courses, print courses to paper maps or OCAD print files, cross reference controls and courses and many other outstanding features
Hardware requirements: IBM compatible PC
Software requirements: Windows 95, 98, NT & 2000
WWW: Download Free evaluation copy
Price: Extended version: AUD $110.00 and Standard version AUD $70.00 - Buy now with your Credit Card
Author: Rex Saye
Address: 5 Hooley Place Kambah ACT AUSTRALIA 2902
Tel.: +61 2 62319661
Distributor: Hannu Mannering
Tel.: +61 2 62317105 Fax: +61 2 62318549

¿ Dónde estoy ?
Current version: 1.0d
Author : Julio Briso-Montiano
e-mail : dondetoy@pagina.de
WWW : http://dondetoy.pagina.de
Description : Orienteering game. You see a photograph and a map. Then you have to click on the map where you think the foto is. It's very easy to understand if you get the free demo at the web page. Soon you will see a video instead photos.
Language : Spanish
Hardaware : Pentium xxx, with 16 MB RAM.
Software : Windows 9x, NT
Price : US34$

DRAW
Current version: 1.0
Address: Pod Lipa 8/84, PL 02-798 Warszawa, Poland
Tel.: +48-22 648 14 70
Ffax: +48-22 648 14 70
Software provides easy start list drawing with computer in public. Easy 100-percent reliability verification. Start list edition dBase III compatible input/output files. Printing while drawing. Drawing from max. two groups. Good visibility - from more than 10 meters.
Language: English, Polish
Hardware requirements: Windows 3.1 compatible computer (386 enh. mode), mouse, 3,5" disk drive for installation, printer
Software requirements: MS-DOS 3.1 or later, MS-Windows 3.1 or later
Price: US $ 29,-- (SRP)
Distributor: author

Econtrol
Current Version: 1.1
Author: Arthur Watson
Address: arthur.watson@acslink.aone.net.au Description: This program will read the contents of a Regnly electronic control. The control numbers, time to each control and split time from the previous control are displayed. The information can be logged to a text file and/or printed on the default printer. It is suitable for events where you don't want or need to preallocate start times, clubs, names and so on that the Regnly 'Tracy' program requires you to do.
Environment: Any standard PC running Windows 3.1 or above. The software was written using Delphi v1 so is a completely self contained executable file.
Languages: Currently English and Norwegian. If anyone wants a localised language version this can be done easily, and at no cost.
Price: Free
Distribution: It is available for download from www.acslink.aone.net.au/aardvarksystems

E-Results Lite
E-Results Lite is free and easy to use software for organizing small orienteering events. For competitions, there is also EResults Pro available.

www.oriento.fi

eTiming
Address: bjarte@emit.no

Description: Timing and administrative software
www.emit.no/etime

Event Organiser for Windows
Current version: 1.1
Author: Matthew Sherlock and Billy Drewnianka Address: 8 Gladys Ave, Frenchs Forest, Australia
Tel.: +61 2 99047571
Fax: +61 2 99047571
E-mail: msherloc@extro.ucc.su.oz.au
Description: Event Organiser is software for Course Setters and Organisers. Features include: - Complete Control Description Event printing - Master list and Master Punch Card Printing - Calculating course lengths - Competitor info including course/control loads For more info see: http://www.usyd.edu.au/~bdrewnia/evento.htm
Languages: English, Swedish, German, Finnish
hardware requirements: min. 2 MB RAM, 4 MB recommended
software requirements: Microsoft Windows 3.1
price: $99US
Distributor: Author

Interactive Contour Tracing for OCAD6/7/8
Current Version 1.0
Author : Don Scarrott
Address : 5, Common Side, Distington, Cumbria, CA14 4PU, UK
Tel.: +44 1946 830 343
The bitmap to be traced is loaded as the template in the base map, and the BoxScan "Initialise" function stores its position, and divides it into parts to best fit the screen. A part is then converted to a brown extract which includes the contours and some clutter. The user selects a contour line, which turns purple, as the program attempts to trace it as far as possible. If it gets stuck in the clutter, there is an edit window where the offending pixels can be removed, and the line is re-traced. When good, the line is stored in a catalogue. Finally, the lines are Deposited" in the correct position in an output OCAD map by replaying the catalogue. This can be a quick and accurate method of tracing contours but does depend on the quality of the brown image obtained from the map, or original source.
Language : English
Hardware Requirements : IBM PC or compatible capable of running OCAD 6/7/8.
Software Requirements : OCAD 6/7/8
Price : Shareware - registration fee £5
Distribution: download from http://members.aol.com/dsbox6

Lost in forest
Author: Peter Danielsson
Address: Kamnarsv 15K:21, 22646 Lund, Sweden
Phone +46 46 157295
Email: e96pd@efd.lth.se
Description: Orienteering game for PC. Realistic 3D-view and random map
generator to create any type of terrain. Finds the fastest way of your
course after you runned it yourself. Fun and educative game for
beginners as well as experienced runners. The game has got very good
recensions from both leaders (as education tool) and active runners.
Language: English and Swedish
Hardware requirements. Pentium 133 or faster
Software requirements: Windows 95/98
Price: US$22
http://www.efd.lth.se/~e96pd/Losteng.html

MapMemory
Current version: 1.0
Author: Adrian Moser
Address: Riethaldenstrasse 23, CH-8266 Steckborn, Switzerland
tel.: (+41) 1 364 41 01
e-mail: amoser@g26.ethz.ch
WWW: http://www.vis.inf.ethz.ch/students/amoser/mapmemory.html MapMemory is a computer memory game. The special about it is that you can play with o-maps or parts of o-maps. Other features are a highscore list, background music, sounds and symbol descriptions in four languages.
language: English
hardware requirements: Macintosh or compatible with min. 68020 or PowerPC processor
software requirements: Mac OS System 7.0
price: US $ 10
distribution: Internet (see WWW-page) or Author

MapStudio
Current version: 2.0
Author: Adrian Moser
Address: Riethaldenstrasse 23, CH-8266 Steckborn, Switzerland tel.: (+41) 1 364 41 01
e-mail: amoser@iiic.ethz.ch, mapstudio@ezinfo.vmsmail.ethz.ch WWW: http://n.ethz.ch/student/admoser/mapstudio.htmlMapStudio is a software for drawing orienteering and other maps. It's a mapping plug-in for Adobe Illustrator. It adds all features to Adobe Illustrator that you need to draw maps: floating palette with map tools, customizable tools and more.
language: English, Japanese
hardware requirements: Macintosh or compatible with min. 68020 or PowerPC processor
software requirements: Mac OS System 7.0, Adobe Illustrator 6.0 (MapStudio 2.0) or Illustrator 5.5 (MapStudio 1.0)
price: Freeware
distribution: Internet (see WWW-page) or Author

MTageOL
Current version: 7.0
Author: Stephan Krämer
Address: Brinkmannstraße 21,
D 95666 Mitterteich,
Germany
tel.: +49 9633 91210
fax: +49 9633 91211
e-mail: StKraemer@tir.baynet.de
URL: http://www.tir.baynet.de/~skraemer
Organizing Multi-Day O-Events (2-6 stages) Administration of multiple events, backup, restore etc. Course setting, IOF control descriptions. Automatical and visual drawing of start lists by using course definitions, optional compressed start times for each club. Manual or automatical time taking, result bills. Interfaces (export) to other packages. Menu driven, window based user interface.
language: German, English
hardware requirements: all hardware supported by MS-Windows
software requirements: MS-Windows 3.1x, MS-Windows 95
price: DM 420,-- plus tax 15%
Distributor: Author

myOL
Current Version: 4.0.5
Author: Hans-Juergen Fabian
Address: Hauptstr. 9, 04685 Nerchau, Germany
Tel.: +49 34382 41276
Fax : +49 34382 42124
E-Mail: HJFab@T-Online.de
URL: www.lvb-ol.de/myOL/Main.html
Web-based Competitor-Database and Event-Organizing-Portal for Individual O-Events, Multiday-Events, Relay-Events, Short-Distance and so on. Course Settings, IOF control descriptions, Start- and Result-Lists, SI-Interface (EMit possible), Ranking List, XML Interface, local Access or Intranet/Internet.
Language: German (English, other Languages possible)
Hardware-Requirements: Pentium, mind. 128MB RAM
Software-Requirements: W2K/XP/Linux, Apache, mySQL, Browser
Price: -.10 EUR per Event-Competitor
Distributor: Author

NAVIGATE!
Current version: 1.0
Author: Geoff Lawford Address: 126 Burrinjuck Crescent, Duffy, ACT 2611, Australia
Tel: 61 6 288 4760
Fax: 61 6 288 2860
E-mail: glawford@ozemail.com.au
WWW: http://www.ozemail.com.au /~glawford/navigate.html
Navigate! is an orienteering simulation program. It comes with 8 different maps, 24 pre-set courses of varying difficulty, a 3D terrain view that updates as you move through it, a results viewing module and a course setting module for setting an unlimited number of new courses. Using the contour maps the competitor must move to and locate in the 3D terrain view the controls, in the shortest possible time. Navigate! has options for simulating cross country, map-memory, window and night orienteering, orienteering with or without a compass, and orienteering in a fog. The competitor can set bearings and count paces. The maps are of gully/spur, granite, karst, and sand dune terrain. When night orienteering the competitor's headlight slowly dims as the battery goes flat. There is a tutorial mode and contour projection capability which helps develop contour interpretation and terrain visualisation skills.
Language: English
Hardware requirements: 486DX PC or better, maths co-processor (ie. DX not SX), mouse, 4mb RAM, 9.5 mb hard disk space, colour screen
Software requirements: Windows 3.1 or later Price: A$69 (about US$52), plus s&h (A$6 Australia and New Zealand, A$7 Asia, A$8 elsewhere)
Distributor: author

OCAD for Windows 95/NT
Current version: 7.0
Author: Hans Steinegger, Steinegger Software
Address: Oberneuhofstr. 5, CH-6340 Baar ,Switzerland
tel.: +41-41 763 18 60
fax: +41-41 763 18 64
E-mail: hs@ocad.com
URL: http://www.ocad.com
OCAD is a software for drawing maps. The fieldwork is entered by a scanner. Drafts can be printed on any graphics printer supported by Windows. Final output
are Postscript files for making the printing films. For more information see www.ocad.com.
Languages: English, German, Swedish, Finnish, French
Hardware requirements: 32 MB recommended
Software requirements: Microsoft Windows 95, 98 or Windows NT (NT version 4.0 or higher)
Price: Swiss Francs 480.--. A free demo version can be downloaded from http://www.ocad.com/download.htm.
Distributor: Author

O-COURSES
Current version: 5.12
Author: Zbynek Cernin
Address: Lamacova 911, CZ-152 00 Praha 5, Czech Republic
Tel: +420 2 51681228
fax: +420 2 51814584
e-mail: zbynek.cernin@volny.cz
WWW:http://orienteering.wz.cz
Course setting for single, single with loops and relay (farsta) events (map exchanges are supported). Program calculates course length, adds climbing between pairs of controls. It is possible to use marked routes or out-of-bounds areas. It prints IOF (pictorial) and text descriptions, plots courses on plotter or shows them on the orienteering map (BMP) on the screen, prepares punched control cards. Controls and routes import from OCAD and courses export to DXF format are possible. Converts OCAD maps (printed to a file) to BMP format.
Language: English, Czech
Hardware requirements: IBM PC 286 or higher (486 recommended); Epson, IBM, HP printers; HPGL plotters (printer and plotter drivers parameters may be modified); Summagraphics MM1201 and compatible digitizers.
Software requirements: DOS 5 or higher
Price: US $15
Distribution: Author

OEvent
Current version: 2.4.0
Author: Goran Nagy
Address: Brodarjev trg 12, 1000 Ljubljana, Slovenia
E-mail: goran.nagy@aster.si
web: http://www.oevent.org
Description: Software for organizing individual and multi-day events (1-9). Chasing start last day (optional). Runners' and classes' databases. Various reports. All reports can be exported in ASCII or HTML format.Printing on labels (custom size and design), envelopes. Manages entry fees.
Language: English
Hardware requirements: 486 or higher, 16 MB RAM
Software requirements: Windows 95/NT
Price: Freeware
Distribution: Author

OLEinzel
Current version: 8.1 for Windows
Author: Stephan Krämer
Address: Brinkmannstraße 21,
D 95666 Mitterteich,
Germany
tel.: +49 9633 91210
fax: +49 9633 91211
e-mail: StKraemer@tir.baynet.de
URL: http://www.tir.baynet.de/~skraemer
Organizing Individual O-Events. Administration of multiple events, backup, restore etc. Course Setting, IOF control descriptions. Automatical and visual drawing of start lists by using course definitions. Manual or automatical time taking, result bills. Interfaces (export) to other packages, e.g. federal rank list calculations or diploma printing.
language: German, English
hardware requirements: all hardware supported by MS-Windows
software requirements: MS-Windows 3.1x, MS-Windows 95
price: DM 220,-- plus tax 15%
Distributor: Author

OL manager
Current version 97
Author: Magnus Johansson
Address: St Lars vag 10, 222 70 Lund, Sweden
Email: sungame@swipnet.se
www: http://www.geocities.com/Colosseum/9982/olman96.html
Description: OL-manager 97 is a tactical OL-game where you take control over an OL-club and participates in The Nordic Relay Leauge (the world-cup for clubs). You begin by handpicking interested good runners from other teams. Then you have to choose the runner that is most suited for each leg. The qualities relay-ability, three types of day-OL, night-OL, pace, stamina (hills) and stamina (plains) is graded by a scale from 1 to 20. You also pick second teams for every competition except 10-mila and Jukola. The game contains 74 clubs from Norway, Sweden and Finland and over 900 real runners (except the age). You can add runners, clubs and edit existing runners. A maximum of four players can take part at the same time and you can save four different games.
Language: English
Hardware requirements. IBM Compatibles, preferbly Pentium with 16MB ram.
Software requirements: Win95.
Price: Free!

OLREDA for dos and windows, same data-files jump between..
Author: Bo Engborg, Evalds Sport-Data HB, Haellefors OK..
Language: At the present time only swedish.
Relay max 5, max 3-days, also suitable for x-skiing, maraton, and should also fit triathlon.. Speakermodule, controldescr., and so on developed during a period of more than ten years on our own events and in cooperation with other organisers.
Hällefors OK homepage at "http://www.abc.se/~m2369/" some info at "http://www.abc.se/~m2369/esdinfo.html", we also have some other software, membership-adm. and entry-handling, tourplay-software (soccer, handball a.s.o)
E-mail: "bo.engborg@abc.se"

OLStaffel
Current version: 7.0
Author: Stephan Krämer
Address: Brinkmannstraße 21,
D 95666 Mitterteich,
Germany
tel.: +49 9633 91210
fax: +49 9633 91211
e-mail: StKraemer@tir.baynet.de
URL: http://www.tir.baynet.de/~skraemer
Organizing Relay O-Events (2-10 runners). Administration of multiple events, backup, restore etc. Course setting. Defining branches by using one of the 3 common methods; providing the course combinations to the teams; printing individual IOF control descriptions for each runner. Manual or automatical time taking, result bills. Interfaces (export) to other packages.
hardware requirements: all hardware supported by MS-Windows
software requirements: MS-Windows 3.1x, MS-Windows 95
price: DM 220,-- plus tax 15%
Distributor: Author

OPLOT
Current version: 3.10 (English), 3.10PL-(Polish)
Author: Marek Wolowczyk
Address: Pod Lipa 8/84, PL 02-798 Warszawa, Poland
Tel.: +48-22 648 14 70
Fax: +48-22 648 14 70
Software plots o-courses on maps by use of HPGL-compatible plotters reading controls/Symbols from ocad 4.0/5.0 files; courses & control description from dBase III Format. Build in course/relay/control description/editor. plotter adjustment. generation courses for 3/4-lag relays. Control description symbols in ocad 5.0-format.
language: English, Polish
Hardware requirements: Windows 3.1 compatible computer (386 enh.mode) XY plotter (HPGL, RD-GL, DXY-GL compatible)
Software requirements: MS-DOS 3.1 or later, MS-Windows 3.1 or later, 3,5" disk drive for installation, OCAD
Price: US $ 59,-- (SRP)
Distributor: Author

OL Results Reporting System TUPP
Current version: 1.0
Author: Gunilla Wickenberg (IBM-Klubben, SWE)
Address: Barrstigen 30, S 1862 Lidingö, Sweden
Tel.: +46-8-7664447
A results reporting system with announcer and press support. Several PCs are connected over LAN with the server keeping current information for all users. The system includes support for the Regnly RTR2 electronic timer.
language: user interface: English, (Swedish)
hardware requirements 1 server PC with min. 386 processor, 10 MB memory, 60 MB harddisk + requester PCs for the users capable of running DOS 5.0 LAN adapters in all PCs, LAN cables and connection boxes as required by number of users and distances between them.(T/R LAN preferred).
software requirements Server: IBM OS/2, LAN Server Program Dataflex 2.3 runtime environment for OS/2Requestors: DOS 5.0 ®, LAN Requestor, Dataflex 2.3 runtime environment for DOS
price to be negotiated
Distributor: Author

ORI 3D
Current version 1.0
Author: Julio Briso-Montiano
Email: bosquing@pagina.de
Description: Game of orienteering on 3D. You move a boy across a 3d world.
Language: Spanish
Hardware requirements. IBM Compatibles, Any age.
Software requirements: DOS. Any version. W95,W98
Price: US$30

Orienteering Analyser
Current version: 8.21
Author: Zbynek Cernin
Address: Lamacova 911, CZ-152 00 Praha 5, Czech Republic
Tel: +420 251 681 228
fax: +420 251 814 584
e-mail: zbynek.cernin@volny.cz
Web Page: http://orienteering.wz.cz
Live event animation of runner's competition on the map and course based on runner's split-times (play, pause, stop functions, speed setting, selection of runners). Real runner's route can be drawn. Easy import of your own competition with split-times downloaded from the web in text file (most common formats are predefined). Colour tables and charts of split-times or accumulated time loss or places, runner's speed per km.
Language: English, German, Spanish, Portuguese, Czech, Polish, Hungarian
Hardware requirements: IBM PC 486 (Pentium recommended), 4MB RAM
Software requirements: Windows 95/98/NT/2000/XP
Price: Standard version Free (Download possible), Extended version 10,-US$
Distribution: SPORTident

Orienteering Organiser
Current version: 8.21
Author: Zbynek Cernin
Address: Lamacova 911, CZ-152 00 Praha 5, Czech Republic
Tel: +420 2 51681228
fax: +420 2 51814584
e-mail: zbynek.cernin@volny.cz
Web Page: http://orienteering.wz.cz
COURSE SETTING:
Course setting directly on the screen with real course setting editor for single, single with loops and relay (farsta) events. Course setting of multiday events on one map (stage layers) or team course setting are possible. For relay you see the whole skeleton of the relay course. You can see more than one course in the editor. Program calculates course length, adds climb between pairs of controls. Map exchanges, marked routes or out of bounds areas are supported. It prints IOF (pictorial) and textual descriptions, prints courses by printer (including descriptions) or plots by plotter, prepares punch pattern cards including EMIT backup or output reports. Controls and routes import from OCAD and courses export to DXF and BMP format are possible.
EVENT ADMINISTRATION:
Single, relay, multiday events, score events (entries, variable entry fees, e-mail support, start time draw, time taking, results, split-times). Full support for SPORTident e-punching system. Network. Various reports, export to TXT and HTML. Data import and export possible.
SPECTATORS & COMMENTATOR:
Live visualisation of runner's split-times coming from SPORTident radio stations on the map and course as class results or presentation for waiting runners (spectator control for relay). Support for commentator.
EVENT ANALYSIS: Data can be used directly for Orienteering <> Analyser software.
INTERNET PUBLISHING: Export data for Animator <> software - internet animations on the map.
Language: English, German, Spanish, Portuguese, Czech, Polish, Hungarian
Hardware requirements: IBM PC 486 (Pentium recommended), 4MB RAM; printer supported by Windows; (HPGL plotters)
Software requirements: Windows 95/98/NT/2000/XP
Price: Version 6 Free. Lite version 8 Free. Full version 8 59-79,-US$ licence for one club. Download possible.
Distribution: Author

Pace Calculator
Current version: 1.0.0
Author: Michael A. Gallagher
Address: 8589 County Road 14, Ionia, NY14475
E-mail: mafg1953@gmail.com (Send any comments or suggestions)
Description: The Pace Calculator calculates and prints a scale of the number of paces it takes you to travel 5 cm on a map of any scale based on the length of your own pace. The print option prints to your default printer.
Language: English
Hardware requirements: Windows compatible computer
Software requirements: Windows 3.1 or later
Price: Free
Distributor: Author
Download Link: http://www.bmi-online.com/orienteering/pace.exe

PEGAS-O
Current version: 7.1 (May 2004)
Author: Olivier Rihoux
Address: 57 rue Lemercier, 5002 Saint Servais, B-Belgium
Tel.: + 32 - 81-732145
e-mail: olivier.rihoux@skynet.be
Web Page : www.pegaso.be
Description: After an event, trace your route on a map image file (Start - Controls - Finish - Intermediate dots) and Save. You will get an *.html file showing your progression. You can include your split times (from Emit or SportIdent) so that your course will be displayed in 'real time'. You can even merge 2 (or 3) files to see the competitors running together and compare their respective course options. The program has been used during several World events to display the winner's route choices.
With version 7, its now possible to get the Start/Finish/Controls extracted directly from Ocad (Using a small utility from Don Scarrott)
Languages: French, English, German, Dutch, Spannish, Italian, Portuguese, Estonian & Swedish
Hardware requirements: IBM compatible PC
Software requirements: Windows 95, 98 or NT 3.51 or higher
Price: Freeware
Download at www.pegaso.be

PICOVER for WINDOWS
(OCAD5 Version)
Current Version: 7.3
Authors : Don Scarrott & Tony Pennick
Address : (TP) 20, Abbey Vale, St. Bees, Cumbria, CA27 0EF, UK
Tel : +44 1946 822495
Course Planning Programs running in conjunction with OCAD 5.
A complete package to prepare and print Pictorial & Text Descriptions, Overprints (+ descriptions if reqd.) master Punch Cards, course lengths and height climb profiles. Designed for Individual and Relay Events.Control site and Course data input to a dedicated database. Complete toolbox of Pictorial Symbols.Detailed input summaries plus many "extras" - course, route and control site loadings, all controls map, complete pictorial listings etc.Automatic update system to cope with late changes. Facilities to generate all outputs in one operation. Comprehensive Windows style on-line help files plus extensive "User’s Guide".
Language : English , but capable of being adapted for most languages.
Hardware Requirements : IBM PC or true compatible capable of running OCAD 5. 3.5" disk drive to install programs.
Software Requirements : OCAD 5 Windows 3.1 or Windows 95 or NT.
Price : Single Copy User £109.00
Club Copy (3 Users) £159.00
User’s Guide £4.95 extra
Distribution : Authors

(OCAD6/7 Version)
Current Version: 7.3
Authors : Don Scarrott & Tony Pennick
Address : (TP) 20, Abbey Vale, St. Bees, Cumbria, CA27 0EF, UK
Tel : +44 1946 822495
Current Version: 11.0
Course Planning Programs running in conjunction with OCAD 6 or OCAD 7.
A complete package to prepare and print Pictorial & Text Descriptions, Overprints (+ descriptions if reqd.) master Punch Cards, course lengths and height climb profiles. Designed for Individual and Relay Events. Control site and Course data input to a dedicated database. Complete toolbox of Pictorial Symbols. Detailed input summaries plus many "extras" - course, route and control site loadings, all controls map, complete pictorial listings etc. Automatic update system to cope with late changes. Facilities to generate all outputs in one operation and to combine pictorials on the same sheet for printing. Comprehensive Windows style on-line help files plus extensive "User's Guide". Latest version will automatically output data for SportIdent Electronic Punching System. Language : English but capable of being adapted for most languages.
Hardware Requirements : IBM PC or true compatible capable of running OCAD 6 or OCAD 7. 3.5" disk drive to install programs.
Software Requirements : OCAD 6, OCAD 7 Windows 95/98 or NT.
Price : Single Copy User £119.00
Club Copy (3 Users) £179.00
User's Guide £4.95 extra
Distribution : Authors. A DEMO version can be downloaded from http://members.aol.com/picovr

PLOTFIX
Current Version 2
Author : Don Scarrott Address : 5, Common Side, Distington, Cumbria, CA14 4PU, UK
Tel.: +44 1946 830343
Survey Plotting Program Enables the User to input the basic survey data (bearings and distances) plot them out on the screen, scale them to fit the base map and output them either as a printed copy (for a non-OCAD map); a .BMP file (for an OCAD template) or an OCAD map. This can either be imported directly into the OCAD base map in the correct place or treated as a separate OCAD map, corrected first and then imported.
Language : English
Hardware Requirements : IBM PC or true compatible capable of running OCAD 5. 3.5” disk drive to install programs.
Software Requirements : OCAD 5 (for some options), DOS 5 or later, Windows 3.1 or Windows 95.
Price : Shareware - registration fee £5
Distribution : Author

Rogaine Router
Current version: 2.00
Author: Paul Shields
Address: 39 Fairlane Drive, Carine. WA 6020 Australia
Email: rogaine@sportscoach.com.au
http://www.sportscoach.com.au/router.html
Description: Rogaine Router quickly identifies a good route for a rogaine. It has several methods built in for doing this so that you can get a good answer in any timeframe you want. It takes as input a list of controls and their coordinates and can produce either a picture of the best route or a list of controls in the right order. This version does not take into account of contours or terrain it just determines the shoretest distance. The program should not be used during a competitive rogaine but rather can help to educate you on route selection. It is free.
Language: English
Hardware requirements. IBM Compatible.
Software requirements: Windows. 3.1 or higher
Price: $0

SPORTident Training 2K
Current version: 1.0 (public beta, final version 2002 January)
Author: Tarmo Klaar
e-mail: tarmo@microlink.ee
WebSite: http://www.tak-soft.com/toode/sit2k.html
Description: SPORTident Training 2K (SIT2K) is program for training and small events (or event without pre-registration and seeding).
Some features
* Small size (installation file ~1 MB)
* Easy to use
* Course description support OPEN courses and points calculating
* Labels for runners and for stands, support check- (RAW) and standard printers
* Reports with and without split times
* Runners database
* Input/output files in comma separate formats - easy to manage data in 3'rd party programs
Languages: English, Estonian
Software requirements: Windows 95 or later
Hardware requirements: PC compatible with Pentium processor, serial port for SPORTident master station and printer
Price: free (up to 20 runners), 15 EUR (up to 200), 65 EUR (unlimited)

SplitsBrowser
Current version: 1.0
Author: Dave Ryder
Address: 28 Lye Valley, Headington, Oxford, OX3 7EP, UK
Tel.: +44 01865 766338
e-mail: dave@TheRyderClan.co.uk
WebSite: http://www.daveryder.freeserve.co.uk/splitsbrowser/index.html
Description: Java applet to display split times in a variety of formats including graphical progress-o-gram plots and textual output. The program is freely available for organisers of events to use to publish their results and the source code released as open source under GPL licence. An application based on the applet is under development.
Languages: English
Hardware requirements: None
Software requirements: Web browser supporting Java
Price: Free - Source code is available as open source under GPL licence
tTiMe
Current version: 0.16
Author: Thierry Matthey
Address: Ole Irgensvei 24, N-5019 Bergen
Tel: +47 55 31 31 46
e-mail: thierry@matthey.org
Web Page: www.matthey.org/ttime
Description: tTiMe is a simple program to generate results and splittimes from Emit AS MTR- or RTR- logfiles together with a runner database editor and MTR downloader.
Features:
* customized results and normalized splittimes/controls (rank & difference)
* code and class check, incl. support for forking
* tool to extract code sequences from MTR-logfile and assign them to the corresponding classes; for code and class check
* ranking and overall results
* invoicing
* press results
* comfortable runner database editor; sort & find
* import of free format comma- or semicolumn separated text based runner databases
* import of eTiming and palisoft runner and team databases
* Excel and HTML export
* download from MTR2, MTR3 and MTR4 with options to configure
* generates equivalent eTiming and epttest logfiles
* reads epttest and eTiming logfiles
* option to read eLine control/competition logfiles
* reads multiple MTR-logfiles as input
* packs all required input files to one zip file
* server down- & upload of runner database
* interface to RouteGadget
* tTiMe release update
* runs on Windows and Linux
* written in perl/tk
Language: English
Hardware requirements: IBM PC 486 (Pentium recommended)
Software requirements: Windows 95/98/NT/2000/XP, Linux
Price: Free
Distribution: Free

UTILITY PROGRAMS for OCAD5
Current Version 5.6
Author : Don Scarrott
Address : 5, Common Side, Distington, Cumbria, CA14 4PU, UK
Tel.: +44 1946 830343
Utility Programs for OCAD 5. Displays maps from directories.
Options to :
- minimise the tool box to only the symbols actually used - significantly reduces file sizes.
- change all tool box fonts to a different type face in one operation.
- automatically convert the text icons to a more easily identifiable symbol, name etc.
- split map on horizontal or vertical axis and recombine.
- cut out an irregular shape from a map and store both parts in separate files. Very useful for splitting maps along "natural" boundaries for surveying purposes, or extracting bits of maps to fill up spaces on the printing plate, or to use for specific competitions when the whole map is not required.
- extract any colour or combination of colours to a separate file.
- identify all symbols actually used on a map (to go in the legend).
- set the angle for tools back to the horizontal if they have been altered during a rotate operation.
- list the dimensions of some of the tools in the tool box.
-.set the print window more accurately than within the program.
- convert an OCAD5 map back to an OCAD4 version.
- extract any colour, or combination of colours, from a map to a new file.
- create a mirror image of a .OCD file. Useful for generating logos etc. which have an axis of symmetry.
- calculate the rotation, offset and scale reduction/enlargement necessary to get the same points on two different maps to fit. Applies these factors to one of the maps so it can be merged with the other map. Very useful when merging OCAD5 maps of adjacent areas.
- convert an ICON to an OCAD5 map with coloured squares. Sets the "map" in a box suitable for printing out as a label for a floppy disk.
- join contour ends exactly and connect part contours together to makes longer ones. Ends not joined are marked with brown blobs so that they can easily be spotted.
- compare the original OCAD5 base map with the finished version, and measure the proportion of the data which remains the same, old or new.
Language : English
Hardware Requirements : IBM PC or true compatible capable of running OCAD 5. 3.5" disk drive to install programs.
Software Requirements : OCAD 5, Windows 3.1 or Windows 95.
Price : Shareware - registration fee £5
Distribution : Author

VirtualOri
Current version: 0.01 2002/6/30
Author: Francisco Silva
Email: chicoze@bonbon.net
Web: www.geocities.com/chicoze2/ori.html
Description: Orienteering game for windows. 3D interactive simulation of an orienteering run. Randomly generates a map every time you run it. Good for contour training. Language: English
Hardware requirements: Pentium 300mhz with video card.
Software requirements: Windows 98 with DirectX 7.0 installed.
Price: Freeware.

WINCACS professional
Current version: 3.14g
Author: Bjørke Data
Address: Groavegen 5, N-5700 Voss, Norway.
E-Mail: bjorke@bigfoot.com
Web: http://www.mamut.com/wincacs
WINCACS is a course setting program which can produce control descriptions, course overprints, master punch control cards, control load maps etc. etc. Maps can be imported in BMP, GIF or OCAD 4/5 format. The overprints can be done by a colour printer, or exported to Postscript to make printing films.
Language: English, Norwegian, Finnish, Swedish.
Hardware requirements: min. 4 MB RAM, VGA adapter or better
Software requirements: Microsoft Windows 3.1, 95, 2000 or OS/2.
Price: NOK 1450,- (US $150) for club licence
Demo version available at http://www.mamut.com/wincacs or from author
Distribution: Author

WinControl
Current version: 2.63
Author: Kari Klossner & Janne Tarkiainen
Address: K.Klossner, Kurjenkatu 9 FIN 20760 Piispanristi, FINLAND
tel: +358 21 242 5588
fax: +358 21 267 8357
e-mail: kklo@mail.wallac.fi short description: A control description software for the course setter to create top quality symbolic control descriptions sheets with.
language(s): English, Swedish and Finnish
hardware requirements: A Windows workstation; 386sx, 4MB RAM, VGA display
software requirements: MS Windows 3.1 or later
price: US$ 119
Distributor: Authors

WinOL
Current version: 1.0
Author: Melin Software
Address: Melin Software HB, Thunbergsv. 26, S-752 28 UPPSALA, Sweden
E-mail: software@melin.nu
WWW: http://www.melin.nu/
WinOL is real-time orienteering simulation software. Use a map and compass to navigate through a three-dimensional landscape with trees, boulders, water and fields. WinOL is designed to be both educational and enjoyable. The registered version has twelve different maps, and it is possible to add new, custom maps. You can use the existing courses, set new courses, or let the computer randomly generate a course. If you find orienteering in daylight too easy, you may want to try night orienteering or perhaps orienteering in fog...
Language: English and Swedish
Hardware requirements: 486DX2 PC or better, 8 MB RAM, SVGA 256 colours.
Software requirements: Windows 95, Windows NT 4.0, or later. Windows 3.1+Win32s may work.
Price: 290 SEK (about US$39), plus shipping & handling.
Distributor: Author

WinOrient
Current version: 1.0
Author: Mirakron
Address: Mirakron, Box 60, 19121 Sollentuna, Sweden
E-mail: info@mirakron.com
WWW: www.mirakron.com
WinOrient is a 3D orienteering simulation software. Use a map and compass to navigate through the 3D landscape. The unregistered version has one map and three courses. The registered version can generate 1000 maps and 1000 courses with userselected difficulty, courselength and number of controls.
Language: English
Hardware requirements: Pentium PC (recommended 200 MHz), 32 MB RAM, 3D-Card.
Software requirements: Windows 95/98/2000/ME ( Not Windows NT), DirectX version 6.1 or later.
Price: US$19.95 (Credit Card or Bank payment, Postgiro in Scandinavia)
Distributor: Download from www.mirakron.com (2.3 MB, Shareware unlocked with licencecode)

WinSplits
Author: Mats Troeng
Address: Tryffelvägen 47, SE-756 46 Uppsala, Sweden
E-mail: mats.troeng@swipnet.se
Website: www.winsplits.nu/english
Languages: English, Swedish, Finnish
Price: approximately SEK 400 ($40), free demo version.
Description: Software for analysis of split times from electronical punching systems. Analyse the splits in an extensive number of tables and graphs, or make a replay of the race. Built-in connection to the free-to-use WinSplits Online database.
Software requirements: Windows 95 or later
Hardware requirements: PC compatible with Pentium processor

ZNS
Current version: 0.77
Author: Martin Bobrovsky
Address: Am Reitweg 47a
2700 Wiener Neustadt
Austria
Tel.: +43-2622-66231
E-Mail: martin.bobrovsky@310-67-8.st.co.at
Description: Organizing individual, multiday (up to 30 events) and relay (up to 9 starters > per team) events,
Manual or automatical time taking (including time signals via RS232; "TimingMouse" available from the author),
Designed for use in networks, Menu driven, List layouts may be adopted to your needs, HTML output of lists, Automatic start list drawing, Barcodes supported, Internal accuracy 1/1000", Support for the speaker, Support for more than 1 start and finish, Results may be evaluated by means of an optional formula, Databases in DBF-format, thus highly reusable in other packages, Data (classes, clubs, runners) may be used for further events, Backup/Restore, Time per kilometer, Advanced statistical reports
Language: german
Hardware requirements: PC, VGA, 640 KB, 3.5" disk drive for installation; recommended: 80486, at least 4 MB
Software requirements: DOS 3.1 or higher; recommended: DOS 5.0 or higher; runs under Windows 95 and Windows NT
Price: ATS 5000 (Demo version ATS 100)
Distributor: Author

___________________________________________________________

Copyright © International Orienteering FederationRevised: 13 May 2005

 

Right menu

World Cup Pages


Copyright 1995-2009, International Orienteering Federation

Valid XHTML 1.0 Transitional

Valid CSS!